Guangzhou Shusen Trading Co., Ltd.
Customer first, Service first, Quality first
Add to Cart
54X54MM UHE215 Epson Projector Bulbs Projector Bare lamp ELPLP96 ,CB-U05,CB-W05,CB-X05
| Product name: | Projector Lamp |
| Model No. | ELPLP96 |
| Condition: | 100% Brand new |
| Type: | UHE215W bare Bulb |
| Lamp power: | 215W |
| Life time : | 2000-3000H |
| Compatible for: | EH-TW650,EH-TW610,EH-TW5650,EH-TW5600,EH-TW5400,EB-X41,EB-X39,EB-X05,EB-W42,EB-W41,EB-W39,EB-W05,EB-U42,EB-U05,EB-S41,EB-S39,EB-S05,EB-980W,EB-2247U,EB-2042,EPSON Home Cinema 1060,EPSON Home Cinema 2100,EPSON Home Cinema 2150,EPSON Home Cinema 660,EPSON Home Cinema 760HD,EPSON Powerlite 107,EPSON Powerlite 108,EPSON Powerlite 109W,EPSON Powerlite 970,EPSON Powerlite 980w,EPSON Powerlite 990u,EPSON Powerlite S39,EPSON Powerlite W39,EPSON PowerLite X39 |
| Installation: | Easy installation. NOT just a bare bulb |
| Warranty: | All items have been QC tested and come with 90 days Warranty |
| Package: | Standard package with mall carton for each piece |
Original 54X54DUHE215 factory original Lamp with housing, the quality can be guaranteed and price is competitive and quality warranty is 90 days after delivery, It contains a 215W UHE bulb with 3000 hours of normal life and 10,000 hours of lamp life in power saving mode.
Steps to Install Your Projector Lamps:
To install a projector lamp with the housing, just follow the easy steps below:
1. Make sure the projector is unplugged and sitting on a flat surface
2. Loosen the screw holding the projector lamp module cover in place and remove the panel
3. Unplug the old projector lamp and remove it from the projector
4. Plug the new projector lamp securely into place
5. Attach the panel back onto the projector and tighten the screw
Warm Noted:
Be sure to use an ELPLP96 Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp.
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp.
If you touch it, wipe off the fingerprints with a soft cloth.
